How to Set Up a Proxy in MoreLogin

MoreLogin is an antidetect browser where every profile gets its own fingerprint. Without a proxy, though, every profile still leaves through the same IP, and that is the fastest way to get accounts linked. The fix is one proxy per profile, set right on the profile, which takes about two minutes.

This guide follows the video step by step, using one of our dedicated SentraCell proxies over SOCKS5. HTTP works the same way; you just pick a different type in step 5.

Subscribe for more walkthroughs

What You'll Need

• •MoreLogin, installed from morelogin.com and signed in. The free plan is enough to follow along.
• •Your proxy details: server, port, username and password. SentraCell customers get them in @sentracell_proxies_bot on Telegram.

Step-by-Step Setup

• 1
  Open MoreLogin and sign in. You land on the Profiles page, which is empty until you make your first profile.
• 2
  Click New profile.
• 3
  Name the profile. Any name works; in the video it's "test one".
• 4
  Go to the proxy section. Click Basic info, then Proxy. This is where the proxy is applied to the profile.
• 5
  Pick the type. Click the dropdown that says No proxy and choose SOCKS5 (or HTTP if that's what you're using).
• 6
  Get your details from the bot. Open the SentraCell bot on Telegram, tap Credentials, then View split format. It shows your proxy broken into the four pieces MoreLogin asks for: server, port, username and password.
• 7
  Copy each piece into its field. Server into the host field, then port, then username, then password, one at a time.
• 8
  Click Proxy detection. After a second it shows the proxy's IP and location. In the video that's Texas, where that phone lives. If it returns an IP, the proxy works.
• 9
  Click Confirm to save the profile.
• 10
  Start the profile with the Start button, open whatismyip.com, and check the result. It should show a mobile IP from your proxy's carrier, Verizon in Texas in the video, not your home connection.

How to Rotate Your IP

Open the SentraCell bot and tap Rotate IP. The phone reconnects to the carrier and comes back with a new IP in 5 to 10 seconds. You don't need to touch MoreLogin: the profile keeps the same server, port and login and uses the new IP on the next page load.

If It Doesn't Work

Proxy detection fails. Copy each field from the bot again and paste it fresh. A space at the start or end is the usual cause. Also make sure the type matches your details: SOCKS5 for SOCKS5, HTTP for HTTP.

The profile shows your real IP. The proxy wasn't saved. Open the profile, go back to Basic info and Proxy, and make sure it doesn't say "No proxy".

Location looks wrong. Proxy detection shows the carrier's registered location, which can be a nearby city. The IP will still be a US mobile IP from the right carrier.

MoreLogin Proxy FAQ

Can I use one proxy on several profiles?

You can enter the same details on more than one profile, but then those profiles share one IP. For accounts that need to look unrelated, use one proxy per profile.

SOCKS5 or HTTP?

Both work in MoreLogin. SOCKS5 is the better default because it carries every kind of traffic. Use HTTP only if a tool you're running needs it.

Do I need to set it up again after rotating?

No. The login stays the same when the IP changes, so the profile keeps working with the new IP.